Price: 29.18 - 27.72
===== Remote Control Switch====
Practical testing2360Rice.
Scope of application: 220V household electricity, power less than 3000 watts of electrical appliances can control its power and power, such as: water pump, mud pump, motor, lamps, fans, fans, insecticide machine, spray machine, car washing machine, bell…… And other types of electrical equipment.
Product features:
1 . Distance: imported uhf level 3 signal amplification tube, 3000 meters remote control distance than the market further, 4000 meters is the distance between theory, general clearing remote control distance of 1000 meters to 1000 meters (environment different, distance is also different, according to actual use environmental interference size), there are obstacles will shorten the distance.
2. Switching POWER supply step-down circuit: LNK304 switching POWER chip manufactured by American POWER company is used to control the POWER supply, ensuring the quality, stability and durability.
3. Wide voltage: it is applicable to the voltage between AC85V and 260V to ensure the long-term stable operation of circuits in different voltage environments.
4. High power: 30A relay is adopted to ensure long-term stable control of high-power electrical appliances.
Do not need ac contactor, direct control of 3000W water pump, motor, lamps and lanterns, car washing machine and other electrical appliances.
5. High sensitivity: the signal reception adopts the real superheterodyne RXB8 module, the sensitivity -114dbm, the sensitivity and anti-interference ability far from the supermarket super regeneration and ordinary superheterodyne module, the remote control distance is longer and more stable.
6. Learning code matching: you can learn the remote control with the same frequency at will (you don't need to worry about losing the remote control in the process of use, just buy a remote control and learn it, no need to replace the whole set, which greatly saves the cost of users).
7. More simple operation: remote control 2 buttons, a button on, a button off, easy to use.
8. Non-interference: adopt digital coding method, and there will be no mutual control between products of the same model with neighbors. (that is, multiple sets of the same model products can be used in the same environment without mutual control.)
The price includes: 1 piece receiver (including shell) +1piece 2-key remote control
Basic parameters
Product model: KGS-A101-4
Rated voltage: 85V-260VAC
Rated power: ≤3000W
Working frequency: 315MHZ
Receive sensitivity: >-114dBm
Coding type: learning type
Remote control size: 136*42*25mm
Receiver size: 123*61*30.5mm
Working mode: interlock, self-locking, jog (can adjust factory default interlock, one button is on, the other button is off) The above dimensions are manual measurement, there may be errors, for reference only.
Remote control distance: 4000 meters, this distance is the theoretical distance without interference, and the actual living environment will be reduced according to the interference degree of different environments and the partition wall (obstacle). The general open space environment is about 10%-50% of the nominal distance, and the remote control distance of each environment is different, depending on the size of the environmental interference.
Working mode can be switched freely
It has been set up before shipment from the factory, and the user does not need to set it when there is no demand.
Working style introduction
(1) Interlock: In the case of two buttons of the remote control, one button is turned on and the other button is called an interlock. When multiple remote controllers control multiple receivers (such as one drag), press the corresponding remote control button, the corresponding receiver is turned on, other receivers are disconnected, and multiple receivers are locked to each other, called For interlocking.
(2) Self-locking; control with one button, press once to open, then press again to turn off, called self-locking.
(3) Jog: Use one button to control, press and hold the remote control button to not let the relay pull in, release the remote control button and the relay is disconnected, which is called jog.
Switching power supply chip step-down advantages
1. Wide voltage, wide range of use: The voltage between 85V and 260VAC can work normally. Some regions in China have low or high voltage (220VAC±10%) and 110VAC overseas.
2. Stable, withstand voltage, low power consumption: standby power consumption is less than 0.5W, which is better than products with more than 1W resistance and voltage drop.
Remote control and receiver learning pairing advantages.
1. A receiver can match up to 60 remote controls for simultaneous use.
2. Assume that the remote control is lost in use, and the love can be used with the remote control. It does not require a complete replacement to save costs.
3. Can be paired with most 315MHZ remote controllers on the market (chips 1527, 2262, 2260, etc.).
Note: The factory has been set up before shipment, the user does not need to set up, after receiving the goods, connect the line and use it directly!
Conventional learning pair code/clearing method
Learning method: After the receiver is powered on, the indicator light will be on for 3 seconds. After the unit is turned off, press the learning button of the receiver for a short time. The indicator light is always on. Press the button of the remote control immediately and the indicator will be extinguished immediately. The learning is successful.
Clearing method: After the receiver is powered on, the indicator will light for 3 seconds. After the unit is turned off, press and hold the learning button of the receiver. The indicator will light up. After 8 seconds, the indicator will flash 3 times and then go out. The clearing is successful.
The following is a method for one button multi-button remote control to control multiple receivers to set single button full open and full off
Total open learning method: After the receiver is powered on, the indicator light will be on. Immediately press the learning button of the receiver twice in a short time. After the indicator light flashes 2 times, press the learning button again, the indicator light will be on. Press the remote control once. The corresponding button indicator will go out immediately and learn successfully.
Total off learning method: After the receiver is powered on, the indicator light will be on. Immediately press the learning button of the receiver once. After the indicator light is off, it will light up again. After the indicator light is off, press the learning button again, the indicator light will be on. Press this time. The corresponding button of the remote control will immediately turn off the indicator and learn successfully.
Warning: Danger of high voltage, be careful of electric shock, non-professionals should not operate, do not operate with electricity, at your own risk!
There are no reviews yet.
