Price: 30.52 - 4.31
Tips for buyers:
Causes of whistling/noise: In order to make a small hearing aid, the internal amplifier and microphone are placed close to each other. The sound is continuously received and expanded, so there is a certain possibility of whistling after power-on. At present, small hearing aids and high-power hearing aids on the market are difficult to avoid whistling, and only fully functional digital hearing aids can avoid whistling.
Ways to avoid whistling/noise:
1. When the power is large (the amplified sound is large), it is more likely to produce howling. Therefore, gradually increasing the bass volume can effectively prevent howling.
2. When the ear canal is completely closed, there is no whistling sound. So after cleaning the ear canal, put on the hearing aid, test the earplugs from large to small, find the most suitable earplugs, and ensure that there is no air leakage.
3. After the hearing aid enters the ear canal, it is recommended to push the hearing aid with your fingers and hold it for 1-2 seconds, then release it to fully extend the earphone.
4. In the shutdown state,turn the volume of the hearing aid to the lowest level, then insert it into the ear. Make sure that the earbud completely fills the ear. Then turn on the power button and slowly increase the volume to a suitable volume.
5. Users who have not heard the sound for a long time may cause hearing loss due to the long-term failure to hear the sound, resulting in the hearing aid still unable to hear the sound. Please persevere, continue to stimulate the growth of the hearing nerve, and you will hear after a while. If you are not sure whether your hearing aid is working properly, you can try the product on a person with normal hearing.
6. Please pay attention to cleaning the ear canal and keep the earplugs clean.
In addition:If you do not know how to use it or there is a problem with your hearing aid, please do not rush to leave a negative review and contact us. Thank you.
Features:
1. Mini BTE Design
2. High-power chip noise reduction
3.2 operating modes, multifunctional design
4.USB rechargeable (no need to replace the battery)
5. Charge 6-8 hours, work up to 20 hours
How to use:
1. Please charge the product first, USB charging for 4-8 hours
2. Choose ear tips that fit your ears. Insert and rotate the ear cups to make them secure, choose the ear tips that fit your ears
3. Put it on and adjust the volume to a suitable volume. Turn down the volume to the minimum to suit different environments
4. Select different modes and switch to "H" or "N" mode (where there is noise, the switch can be adjusted to "H" mode to reduce low frequency noise)
Specification:
Peak OSPL 90(dB SPL):118dB
HAF OSPL 90( dB SPL):110dB
Peak Gain(dB):36dB
HAF/FOG Gain (dB):32dB
Frequency range(Hz):300-3200Hz Distortioan :
500Hz:5.0%
800Hz:3.0%
1600Hz: 3.0%
Equivalent Input Noise(dB):28dB
Voltage:D.C.1.2V
Battery size :Built-in NI-MH Battery
Current:≤2.5mA
Charging Tine(H):6~8
Once charge working Time(H):20h
Size;49×42×9 mm
color:Beige/Blue
Package Included:
1 x Hearing Aid
4 x earplugs (different sizes)
1 x User Manual
1 x Cleaning Brush
1 x USB charging cable with charging head
Warn:
Charger input: AC100-240V, 50-60hz/0.15a
Charger output: 5v, 1000ma
1. Please use the corresponding charger to charge the product, otherwise the product may be damaged.
2. If you need to replace the charger, please use the charger suitable for this product. If the product is charged with an unsuitable charger, it will cause damage to the product.
3. Please do not use hearing aids at high volume for a long time, it will damage your hearing
4. Please do not use it in a humid environment, please do not get close to the heat source
5. Please be careful to protect the hearing aid and avoid falling to the ground
