Price: 7.22 - 3.97
Product selling points:
1. The function of the soft start board is to reduce the impact of the machine on the power grid and extend the lifespan of the switch by reducing the instantaneous impulse current during startup
2. This board uses a super high current (100A) pure copper relay and a super large thermistor NTC 20D-20, effectively protecting the machine from excessive startup current
3. This board does not require auxiliary power supply, only has 2 wiring terminals, one connected to the power input (previously connected to a switch control), and one output connected to the load, making it very convenient to use
4. On the market, the discharge resistor is omitted for the soft start with power amplifier and high-voltage capacitor, which makes it extremely unsafe for the soft start circuit board to remain live even after unplugging the power plug. As a result, the plug is live and can easily harm family members. This circuit board is equipped with a safe discharge resistor, which can be used with confidence
5. This product is not suitable for soft start of low-power devices such as 40W, 100W, 200W, and 300W. It belongs to high current soft start, and provides a soft start current of around 300-400W at the moment of power on. The relay will engage and conduct conduction in about 3 seconds
Product parameters:
Note: This product is not suitable for motor use
Name: High power soft start circuit board
Relay: RGL high-power ultra high current 100A pure copper foot relay
Scope of application: Suitable for high-end audio power input or other high starting current machine applications
Usage power: Suitable for use within 2400W, preferably for long-term loads within 1400W!
Applicable range of power supply voltage: AC150V-280V
Working principle:
At the initial stage of power on, the load is powered by two thermistors with negative temperature coefficient. As the temperature of the thermistor rises, the resistance value drops and the voltage rises slowly, which effectively suppresses the impact of surge current on the line and other electrical appliances. After about 2 seconds, the relay will close and short-circuit the thermistor. The power will be directly supplied to the load through the relay contacts, and the load will enter a normal working state.
Wiring sequence: power supply switch soft start transformer
Packaging list:
High frequency filtering module * 1
