Product Details

You can order 24PIN flat and wide-angle lens cable accessories as shown below.

Note:

1.Ensure sufficient electricity quantity for WiFi series products feature large power consumption. Be sure to remember that it should be used after full charge; the insufficient electricity quantity will lead to poor connection, failure on signal searching, frequent off-line and unstable video etc.

So, if you encounter the problem mentioned above, please charge the device and re-start it after charging. The step will solve all problems.

2.Never to watch videos by directly opening mobile software. Make sure that you've already connected the hot-spot of this WiFi product before opening the software. Otherwise, you will fail to watch videos normally.

It may be a bit hot under working for this camera, as it does not have protective case on the device , but please do not worry , we can promise it is normal and 100% safe。

This is a network camera.There is no distance limitation for you to view or record live videos after you complete the network

configuration on your smartphone APP in the P2P mode. You can view or record live videos any where any time you want. same time

Parameters:Video Format

Features:Real-time Audio & Video Recording

View Angle: 90 degree/120 degree

Microphone: Built-in Memory

Support ：128GB Micro Card

Battery Life Time: 2 hoursStorage （Some types do not include battey)

Temperature: -20-80 degree centigradeOperating

Temperature: -10-60 degree centigradeOperation

Humidity: 15-85%RH

Memory Card Type: TF card

Smartphone Operating System: iPhone iPad or Android

Battery Charging Voltage: DC 5V

2) .Android phone  Search“ LOOKCAM” in Google App market to download and install it.
Apple phone  Search“ LOOKCAM” in App Store to download and install it.

Addition of AP Hot Spots

Enter the phone WIFI settings, find the camera AP HotSpots account (device UID number) and connect. as the picture shows

After connecting the device UID as shown below, open the phone app (LOOKCAM) .

Router mode Connection (Remote viewing)

When you can watch the video with hotSpot, please go back to the previous level and enter the interface as shown.

Click the Settings icon → WiFi Connection Configuration → Find WiFi → Enter Password → Click OK to restart the camera. (After camera connet to router, refresh the page, waiting for about 40 seconds and the camera status will become online.)